dmesg - pts stream 1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@roseapple) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fbfffff] usable
BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Xen HVM domU, BIOS 4.1.3 09/25/2012
Hypervisor detected: Xen HVM
Xen version 4.1.
Xen Platform PCI: I/O protocol version 1
Xen Platform: blacklisted by host
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1fc00 max_arch_pfn = 0x1000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-combining
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0F0000000 mask FF8000000 uncachable
1 base 0F8000000 mask FFC000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000fbba0-0x000fbbaf] mapped at [c00fbba0]
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009a000] 9a000 size 16384
init_memory_mapping: [mem 0x00000000-0x1fbfffff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x1fbfffff] page 2M
kernel direct mapping tables up to 0x1fbfffff @ [mem 0x01ffb000-0x01ffffff]
RAMDISK: [mem 0x1e1b6000-0x1f013fff]
ACPI: RSDP 000ea020 00024 (v02 Xen)
ACPI: XSDT fc00eb00 00044 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: FACP fc00e8c0 000F4 (v04 Xen HVM 00000000 HVML 00000000)
ACPI: DSDT fc002c40 0BBF3 (v02 Xen HVM 00000000 INTL 20090123)
ACPI: FACS fc002c00 00040
ACPI: APIC fc00e9c0 000D8 (v02 Xen HVM 00000000 HVML 00000000)
ACPI: HPET fc00eaa0 00038 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: WAET fc00ead8 00028 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
508MB LOWMEM available.
mapped low ram: 0 - 1fc00000
low ram: 0 - 1fc00000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x1fbfffff]
HighMem empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009dfff]
node 0: [mem 0x00100000-0x1fbfffff]
On node 0 totalpages: 129934
free_area_init_node: node 0, pgdat c18a0840, node_mem_map df807200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3950 pages, LIFO batch:0
Normal zone: 984 pages used for memmap
Normal zone: 124968 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1f48
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
15 Processors exceeds NR_CPUS limit of 8
SMP: Allowing 8 CPUs, 7 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
e820: [mem 0x1fc00000-0xfbffffff] available for PCI devices
Booting paravirtualized kernel on Xen HVM
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @df793000 s34176 r0 d23168 u57344
pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128918
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
allocated 1040256 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00000000:00000000)
Memory: 488464k/520192k available (5956k kernel code, 31272k reserved, 2928k data, 756k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xe0400000 - 0xffbfe000 ( 503 MB)
lowmem : 0xc0000000 - 0xdfc00000 ( 508 MB)
.init : 0xc18ae000 - 0xc196b000 ( 756 kB)
.data : 0xc15d1358 - 0xc18ad6c0 (2928 kB)
.text : 0xc1000000 - 0xc15d1358 (5956 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:1152 16
Xen HVM callback vector for event delivery is enabled
CPU 0 irqstacks, hard=ddc0a000 soft=ddc0c000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
Cannot get hvm parameter 18: -22!
hpet clockevent registered
Detected 2693.654 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.30 BogoMIPS (lpj=10774616)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
mce: CPU supports 0 MCE banks
SMP alternatives: switching to UP code
ACPI: Core revision 20120320
ftrace: allocating 24585 entries in 49 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel Pentium(R) Dual-Core CPU E5400 @ 2.70GHz stepping 0a
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
cpu 0 spinlock event irq 70
Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
Brought up 1 CPUs
Total of 1 processors activated (5387.30 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
dummy:
RTC time: 6:55:58, date: 01/09/13
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
PCI: PCI BIOS revision 2.10 entry at 0xfb530, last bus=0
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: >host bridge window [mem 0xf0000000-0xfbffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0xf0000000-0xfbffffff]
pci 0000:00:00.0: >[8086:1237] type 00 class 0x060000
pci 0000:00:01.0: >[8086:7000] type 00 class 0x060100
pci 0000:00:01.1: >[8086:7010] type 00 class 0x010180
pci 0000:00:01.1: >reg 20: [io 0xc220-0xc22f]
pci 0000:00:01.2: >[8086:7020] type 00 class 0x0c0300
pci 0000:00:01.2: >reg 20: [io 0xc200-0xc21f]
pci 0000:00:01.3: >[8086:7113] type 00 class 0x068000
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:01.3: >quirk: [io 0x1f40-0x1f7f] claimed by PIIX4 ACPI
pci 0000:00:02.0: >[1013:00b8] type 00 class 0x030000
pci 0000:00:02.0: >reg 10: [mem 0xf0000000-0xf1ffffff pref]
pci 0000:00:02.0: >reg 14: [mem 0xf3000000-0xf3000fff]
pci 0000:00:03.0: >[5853:0001] type 00 class 0x010000
pci 0000:00:03.0: >reg 10: [io 0xc000-0xc0ff]
pci 0000:00:03.0: >reg 14: [mem 0xf2000000-0xf2ffffff pref]
pci 0000:00:04.0: >[10ec:8139] type 00 class 0x020000
pci 0000:00:04.0: >reg 10: [io 0xc100-0xc1ff]
pci 0000:00:04.0: >reg 14: [mem 0xf3001000-0xf30010ff]
pci_bus 0000:00: >on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci0000:00: >Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
xen/balloon: Initialising balloon driver.
xen-balloon: Initialising balloon driver.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x1fc00000-0x1fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 62.500000 MHz counter
Switching to clocksource xen
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[mem 0x00000000-0x0009ffff]
system 00:00: >[mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: >[bus 00-ff]
pnp 00:01: >[io 0x0cf8-0x0cff]
pnp 00:01: >[io 0x0000-0x0cf7 window]
pnp 00:01: >[io 0x0d00-0xffff window]
pnp 00:01: >[mem 0x000a0000-0x000bffff window]
pnp 00:01: >[mem 0xf0000000-0xfbffffff window]
pnp 00:01: >Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: >[io 0x10c0-0x1141]
pnp 00:02: >[io 0xb044-0xb047]
system 00:02: >[io 0x10c0-0x1141] has been reserved
system 00:02: >[io 0xb044-0xb047] has been reserved
system 00:02: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: >[mem 0xfed00000-0xfed003ff]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: >[io 0x0010-0x001f]
pnp 00:04: >[io 0x0022-0x002d]
pnp 00:04: >[io 0x0030-0x003f]
pnp 00:04: >[io 0x0044-0x005f]
pnp 00:04: >[io 0x0062-0x0063]
pnp 00:04: >[io 0x0065-0x006f]
pnp 00:04: >[io 0x0072-0x007f]
pnp 00:04: >[io 0x0080]
pnp 00:04: >[io 0x0084-0x0086]
pnp 00:04: >[io 0x0088]
pnp 00:04: >[io 0x008c-0x008e]
pnp 00:04: >[io 0x0090-0x009f]
pnp 00:04: >[io 0x00a2-0x00bd]
pnp 00:04: >[io 0x00e0-0x00ef]
pnp 00:04: >[io 0x08a0-0x08a3]
pnp 00:04: >[io 0x0cc0-0x0ccf]
pnp 00:04: >[io 0x04d0-0x04d1]
system 00:04: >[io 0x08a0-0x08a3] has been reserved
system 00:04: >[io 0x0cc0-0x0ccf] has been reserved
system 00:04: >[io 0x04d0-0x04d1] has been reserved
system 00:04: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: >[dma 4]
pnp 00:05: >[io 0x0000-0x000f]
pnp 00:05: >[io 0x0081-0x0083]
pnp 00:05: >[io 0x0087]
pnp 00:05: >[io 0x0089-0x008b]
pnp 00:05: >[io 0x008f]
pnp 00:05: >[io 0x00c0-0x00df]
pnp 00:05: >[io 0x0480-0x048f]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:06: >[io 0x0070-0x0071]
xen: --> pirq=16 -> irq=8 (gsi=8)
pnp 00:06: >[irq 8]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: >[io 0x0061]
pnp 00:07: >Plug and Play ACPI device, IDs PNP0800 (active)
xen: --> pirq=17 -> irq=12 (gsi=12)
pnp 00:08: >[irq 12]
pnp 00:08: >Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:09: >[io 0x0060]
pnp 00:09: >[io 0x0064]
xen: --> pirq=18 -> irq=1 (gsi=1)
pnp 00:09: >[irq 1]
pnp 00:09: >Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0a: >[io 0x03f0-0x03f5]
pnp 00:0a: >[io 0x03f7]
xen: --> pirq=19 -> irq=6 (gsi=6)
pnp 00:0a: >[irq 6]
pnp 00:0a: >[dma 2]
pnp 00:0a: >Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:0b: >[io 0x03f8-0x03ff]
xen: --> pirq=20 -> irq=4 (gsi=4)
pnp 00:0b: >[irq 4]
pnp 00:0b: >Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: >[io 0x0378-0x037f]
xen: --> pirq=21 -> irq=7 (gsi=7)
pnp 00:0c: >[irq 7]
pnp 00:0c: >Plug and Play ACPI device, IDs PNP0400 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0xf0000000-0xfbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: >Limiting direct PCI/PCI transfers
pci 0000:00:01.0: >PIIX3: Enabling Passive Release
pci 0000:00:01.0: >Activating ISA DMA hang workarounds
xen: --> pirq=22 -> irq=23 (gsi=23)
pci 0000:00:02.0: >Boot video device
PCI: CLS 0 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1203.775:1): initialized
Trying to unpack rootfs image as initramfs...
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 954
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xf0000000, mapped to 0xe0480000, using 1408k, total 1408k
efifb: mode is 800x600x24, linelength=2400, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
xen: --> pirq=23 -> irq=30 (gsi=30)
Grant tables using version 1 layout.
Grant table initialized
Cannot get hvm parameter 18: -22!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Freeing initrd memory: 14712k freed
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.1: >version 2.13
ata_piix 0000:00:01.1: >setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc220 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc228 irq 15
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: >setting latency timer to 64
uhci_hcd 0000:00:01.2: >UHCI Host Controller
uhci_hcd 0000:00:01.2: >new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: >irq 23, io base 0x0000c200
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: UHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb1: >SerialNumber: 0000:00:01.2
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos 00:06: >RTC can wake from S4
rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 13:169:923
rtc_cmos 00:06: >setting system clock to 2013-01-09 06:55:59 UTC (1357714559)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata1.01: NODEV after polling detection
ata1.00: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100
ata1.00: 41943040 sectors, multi 16: LBA48
ata2.01: ATAPI: QEMU DVD-ROM, 0.10.2, max UDMA/100
ata2.01: configured for MWDMA2
ata1.00: configured for MWDMA2
scsi 0:0:0:0: >Direct-Access ATA QEMU HARDDISK 0.10 PQ: 0 ANSI: 5
sd 0:0:0:0: >[sda] 41943040 512-byte logical blocks: (21.4 GB/20.0 GiB)
sd 0:0:0:0: >[sda] Write Protect is off
sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: >[sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: >Attached scsi generic sg0 type 0
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: >[sda] Attached SCSI disk
scsi 1:0:1:0: >CD-ROM QEMU QEMU DVD-ROM 0.10 PQ: 0 ANSI: 5
Refined TSC clocksource calibration: 2693.658 MHz.
sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: >Attached scsi CD-ROM sr0
sr 1:0:1:0: >Attached scsi generic sg1 type 5
Freeing unused kernel memory: 756k freed
Write protecting the kernel text: 5960k
Write protecting the kernel read-only data: 2424k
NX-protecting the kernel data: 4280k
udevd[89]: starting version 175
usb 1-2: >new full-speed USB device number 2 using uhci_hcd
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
xen: --> pirq=55 -> irq=32 (gsi=32)
8139cp 0000:00:04.0: >eth0: RTL-8139C+ at 0xe040c000, ba:ee:88:d8:be:75, IRQ 32
8139cp 0000:00:04.0: >setting latency timer to 64
8139too: 8139too Fast Ethernet driver 0.9.28
FDC 0 is a S82078B
usb 1-2: >New USB device found, idVendor=0627, idProduct=0001
usb 1-2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb 1-2: >Product: QEMU USB Tablet
usb 1-2: >Manufacturer: QEMU 0.10.2
usb 1-2: >SerialNumber: 1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/input/input3
hid-generic 0003:0627:0001.0001: >input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 518140k swap on /dev/sda5. Priority:-1 extents:1 across:518140k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[318]: starting version 175
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
parport_pc 00:0c: >reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
piix4_smbus 0000:00:01.3: >SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa0b
ppdev: user-space parallel port driver
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
init: failsafe main process (518) killed by TERM signal
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
type=1400 audit(1357714569.403:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=576 comm="apparmor_parser"
type=1400 audit(1357714569.403:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=576 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
8139cp 0000:00:04.0: >eth0: link up, 100Mbps, full-duplex, lpa 0x05E1
type=1400 audit(1357714573.743:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=753 comm="apparmor_parser"
type=1400 audit(1357714573.743:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=753 comm="apparmor_parser"
type=1400 audit(1357714573.759:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=754 comm="apparmor_parser"
type=1400 audit(1357714573.759:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=754 comm="apparmor_parser"
type=1400 audit(1357714573.775:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=755 comm="apparmor_parser"
type=1400 audit(1357714573.775:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=755 comm="apparmor_parser"
type=1400 audit(1357714573.779:10): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=756 comm="apparmor_parser"
type=1400 audit(1357714573.783:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=756 comm="apparmor_parser"
mtrr: no MTRR for f0000000,100000 found